Controlling your compressors with CG solutions ensures efficient, reliable and user-friendly operation. Damage and downtime are prevented, maintenance is reduced and energy consumption is minimized.
Reliable and efficient operation saves energy
Emotron AC drives continuously adapting flow/pressure to the level required, saving energy and monimising wear. Inefficiency due to worn equipment, air leakage or the compressor idling is immediately detected.
Parameters can be set in your own process units, making monitoring easier and safer. Up to seven compressors can be controlled without using PLCs or other external equipment.
Emotron softstarters greatly reduce start currents, minimising mechanical stress and allowing you to use smaller fuses and less expensive cables. This results in reduced energy, installation and maintenance costs.
The built-in torque control enables you to start more smoothly with constant acceleration. This means improved process control and reduced maintenance. The compressor can be rotated at a slow speed to ensure free rotation prior to starting.
Emotron offers efficient protection of your compressors, saving you maintenance and downtime costs. Our shaft power monitors, also built into our other products, prevent damage and inefficiency by sending a warning or stopping the process, for example if cooling agent enters into the compressor screw.
This is done by using a unique technique of calculating the motor shaft power. Any over- and underload situation is detected immediately, across the entire speed range. Using the motor as its own sensor requires no costly and service-demanding external sensors.
Meld u aan voor onze nieuwsbrief en ontvang het laatste nieuws.
Copyright ©
Emotron